Skip to main content

Replacing VIA ART-3000 Power Adapter


The VIA ART-3000 is a complete, fanless and ruggedized embedded box PC, designed for a broad range of industrial, kiosk, POI and signage applications.
it comes with EITX-3000 motherboard, a 1.3 GHz Nano processor, up to 2Gb DDR2 RAM, onboard Chrome 9 graphics solution, one 2.5” SATA drive bay, two Gigabit Ethernet ports, four COM ports, six USB connectors, dual LVDS and a VGA port.
Current Status is EOL in VIA website. (http://www.viaembedded.com/en/support/eol/art-3000/)

Today I'm going to show you how you can easily replace faulty power adapter. The reason is i'm not able to get the quote and reply from VIA authorized distributor. So this is the fastest way of replacing your own adapter. 
The original power adapter is 19V output which is similar to most of laptop's power adapter. Here i bought cheap SGD $30 from Sim Lim tower. 

Picture 1

Picture 1 shows 19V original charger.

Picture 2
Picture 2 shows HP Laptop charger which is also 19V. So now i cut the wire near the jack.

Picture 3
After cutting the cable near to the jack and I measured the voltage of the 3 cables with volt meter. Red (+) and White (-) has the output 19V. Then I attached Red and White cable to the ART-3000 power input connector which shown green in Picture 3.
Picture 4.
Before power on, make sure to test the voltage again. I'm able to power on and successfully replaced with HP laptop adapter with SGD $30.

Comments

Post a Comment

Popular posts from this blog

Unable to launch IPMI with Java version 1.8.131

I have issue with launching IPMI after java JRE version update 1.8.131. "Error: unsigned application requesting unrestricted access to system the following resource is signed with a weak signature algorithm MD5withRSA and is treated as unsigned" The resolution is you can comment out java.security under C:\Program Files\Java\jre1.8.0_131\lib\security #jdk.jar.disabledAlgorithms=MD2, MD5, RSA keySize < 1024 you will able to launch JNLP file without issue.
Post a Comment
Read more

Fixing Acer Aspire Z3-605 All-in-one speaker buzzing noise - Part 1

 My Acer Aspire Z3-605 AIO PC speaker has buzzing noise. So I decided to replace the speaker. Unscrew 8 screw from the back side. Total 8 screw at back side Pry up starting from below silver color area. Take out speaker You can see the vibrating membrane or sound film has melted. I search in ebay and the price is about USD $19. So I decided to open and see whether I can just replace the speaker only.  The size of the speaker is 24mm diameter and 10mm thickness. I don't see any label or model no on the back side. I search in google about the wattage of the speaker found it's 3 watts. Then I measured with multimeter and it's 4 ohm. So I searched in China site and found the speaker about SGD $2.  So I just purchased 2 pieces and approximately 2 weeks time to reach to Singapore.  To be continued
1 comment
Read more

How to install Rust on WSL Ubuntu 20.04 on Windows 10

Recently I have installed WSL1 on my Windows 10 (1909) laptop and wanted to try Rust compiler on Ubuntu 20.04. but I have issue with installation. So this GitHub link is working fine. https://github.com/rust-lang/rustup/issues/2245 export RUSTUP_IO_THREADS=1 curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh info: downloading installer Welcome to Rust! This will download and install the official compiler for the Rust programming language, and its package manager, Cargo. Rustup metadata and toolchains will be installed into the Rustup home directory, located at:   /home/myubu/.rustup This can be modified with the RUSTUP_HOME environment variable. The Cargo home directory located at:   /home/myubu/.cargo This can be modified with the CARGO_HOME environment variable. The cargo, rustc, rustup and other commands will be added to Cargo's bin directory, located at:   /home/myubu/.cargo/bin This path will then be added to your PATH environment variable by modifying th...
Post a Comment
Read more